Navigation
- Z01
PAPER,COATED PAPER (WOODEN PRODUCTS) - Z02
FLEXIBLE VINYL(PVC) - Z03
ACRYL (PMMA) - Z04
POLYCARBONATE(PC) - Z05
POLYESTER - Z06 OLEFINE
- Z07
MODIFIED PPO/PPE(NORYL,XYLON) - Z08
POLYURETHANE AND OTHER FLEXIBLE SUBSTRATES - Z09
WATER-PROOF NYLON - Z10
COATED PLASTICS / COATED WOOD - Z11
UNCOATED METAL, PLATED SURFACE, GLASS, CERAMICS, THERMOSETTING RESIN, HARD-COAT SURFACE - Z12
UNTREATED POLYETHYLENE, UNTREATED POLYACETAL, SYNTHETIC RUBBER(EXCEPT URETHANE RUBBER), NATURAL RUBBER, SILICONE RUBBER, SILICONE RESIN, FLUOROCARBON RESIN(TEFLON)
Z01-01 PAPER,COATED PAPER (WOODEN PRODUCTS)
Every type of ink basically adheres to these kinds of products although some UV inks do not. Heat-drying type of ink is not proper to these substrates.
LIST
- #600 VAC COLOR
Gloss. Ink film is thick. High opacity. Good printability. Low odor. - MATT VINYL
Matt. Fast drying. Fluorescent/halftone inks are available. - RC OP 43
Clear ink can be printed on off-set prints as over-coating varnish. - RC CPO 63
Printability with cylinder press is excellent. Fast cure.
Z01-02 SYNTHETIC PAPER
There are various types in synthetic paper. Adhesion of the ink varies depending on which type of paper the substrate is. Some inks adhere to almost all of this kind of paper, while some adheres to only a few kinds. Pre-test is essential before commercial run.
LIST
