ADDITIVE LIST （FOR UV-cure ink）
Oct, 2013
| Item No. Name |
Appearance Adding ratio (%) |
Applications Usage |
Packing Container |
|---|---|---|---|
| JAR-1 Varnish |
Viscous liquid 1-20 | To improve curing. | 1kg Plastic |
| JAR-8 Accelerator |
Liquid 1-4 | Photo-initiator for colored inks. | 100g Plastic |
| JAR-15 Accelerator |
Liquid 1-4 | Photo-initiator for all inks. | 500g / 1kg Plastic |
| JAR-16 Additive |
Liquid 3-5 | To imporve adhesion and water-proofness. Pot life : approx.12 hours | 400g Plastic |
| JAR-18 Additive |
Liquid 1-3 | To imporve adhesion and water-proofness. Pot life : approx.12 hours | 500g Plastic |
| JAR-20 Matting agent |
Powder 5-20 | Viscosity is increased. Stir well before use. | 1kg Polyethylen bag |
| JAR-22 Additive |
Viscous liquid 1-2 | To increase viscosity and to prevent the ink from dropping off the screen. | 500g Plastic |
NOTICE
- JA-244, JA-750 and JA-950H can be used with both solvent-based inks and UV inks.
- Please refer to MSDS before use.
- Be sure to do trial print before commercial run to confirm that the product fits the purposes.
